Optimize your Internet connection (TCP) and maximize your bandwidth in Linux

Posted: May 17th, 2008 | Author: | Filed under: IT Related | Tags: , , , , | 6 Comments »

Simply modify your sysctl file and poof!

sudo gedit /etc/sysctl.conf

copy and past the following code at the last line on your sysctl file

# increase TCP max buffer size setable using setsockopt()
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
 
# increase Linux autotuning TCP buffer limits
# min, default, and max number of bytes to use
# set max to at least 4MB, or higher if you use very high BDP paths
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
 
# don't cache ssthresh from previous connection
net.ipv4.tcp_no_metrics_save = 1
net.ipv4.tcp_moderate_rcvbuf = 1
 
# recommended to increase this for 1000 BT or higher
net.core.netdev_max_backlog = 2500
 
# for 10 GigE, use this, uncomment below
# net.core.netdev_max_backlog = 30000
# Turn off timestamps if you're on a gigabit or very busy network
# Having it off is one less thing the IP stack needs to work on
#net.ipv4.tcp_timestamps = 0
# disable tcp selective acknowledgements.
net.ipv4.tcp_sack = 0
 
#enable window scaling
net.ipv4.tcp_window_scaling = 1

tada… now run the following command

sudo sysctl -p

Streamyx ROX

Posted: April 10th, 2008 | Author: | Filed under: IT Related, My Self, Project | Tags: , | 1 Comment »

Sorry guys… I didn’t mean to show you my screenshot

Hahahaha… I’ll post the discussion on how to get the same/almost the same speed in my next post